CNC Cabinetry Oxford Greystone O19
Greystone is the deeper of the two Oxford grays, and that depth is what makes the pressed texture read. The CNC Cabinetry Oxford Greystone O19 is a five piece shaker door in PVC laminate over a three inch solid wood rail, hung on a frameless box. HM Cabinetry keeps the Oxford Greystone O19 door at the East Brunswick showroom next to the silver, which is the comparison that settles most of these decisions.
What is built into the CNC Cabinetry Oxford Greystone O19
A darker gray shows texture better and shows marks more, and that is the trade on this door. The CNC Cabinetry Oxford Greystone O19 answers the second half with a deep pressed grain that scatters light instead of holding a smooth reflection, and the five piece shaker frame carries a solid wood rail rather than a wrapped core. The box is frameless, with the opening running the full width of the cabinet.
• Full overlay PVC laminate shaker door, five piece construction
• Solid wood 3 inch rail with a deep textured laminate face
• Greystone tone in the frameless full access Classic series
• 1/4 inch back panel braced with 3/4 by 4 inch rails top and bottom
• Wood dowel joinery, glued and clamped under pressure
• 3/4 inch plywood end panels, dowel built
• 3/4 inch full depth plywood shelves, fully adjustable
• Heavy duty steel concealed hinges, six way adjustable with soft close
• 3/4 inch double wall metal drawer with a wood bottom and soft close
• 4 inch toe kick with a 3 inch inset on base and vanity cabinets
More about CNC Cabinetry Oxford Greystone O19
Greystone works where a kitchen needs weight at the bottom and light at the top. Run across the base cabinets with a lighter wall cabinet or open shelving above, it grounds the room without closing it in, and the texture keeps the dark gray from reading as a painted slab. HM Cabinetry uses Oxford Greystone O19 that way in Middlesex and Monmouth county kitchens with eight foot ceilings, where a full dark run would sit too low on the room.
The build is where this series separates itself from cheaper laminate. The box is held with wood dowels glued and clamped under pressure instead of staples through a thin panel, and the quarter inch back is braced with three quarter by four inch rails top and bottom so the cabinet does not rack when it is screwed to an uneven wall. Drawers are double wall metal with a wood bottom, which carries weight better than a stapled wood box and keeps the side profile thin so the drawer holds more. Shelves are full depth plywood and fully adjustable.
Dark doors show dust along the top rail, and a textured dark door shows it slightly less. HM Cabinetry sets the six way hinges on the Oxford Greystone O19 after the first heating season, keeps a spare door for the trash pull position where wear turns up first, and sources replacements from the same batch so the gray matches across the run.
Related pages
Price your CNC Cabinetry Oxford Greystone O19
Send a photo or a rough sketch of your kitchen and we will come back with real numbers for your own layout.
- ✓ No obligation, no pressure
- ✓ Photos and drawings welcome
- ✓ Kitchen, bathroom and custom cabinetry