Pearl Mocha is the second of the two Harmony finishes, and it is the one that makes the molding obvious. The CNC Cabinetry Harmony Pearl Mocha HB13M carries a deeper warm tone across the same five piece door, three inch rail and angled interior molding, so every step in the profile reads from across the room. HM Cabinetry keeps the Harmony Pearl Mocha HB13M door at the East Brunswick showroom, standing beside the pearl.

The darker a profiled door gets, the more of the profile you see, and that is the whole difference between the two Harmony finishes. The CNC Cabinetry Harmony Pearl Mocha HB13M puts a deeper warm tone on the same five piece solid wood door, with a three inch rail, an angled interior molding and a reversed raised center panel in MDF veneer, over the same interlock box.
• Full overlay five piece solid wood door with a 3 inch rail
• Reversed raised solid MDF veneer center panel
• Mitered profile with an angled interior molding
• Mortise and tenon construction
• Full 1/2 inch plywood back installed with the interlock system
• 1/2 inch plywood sides, light maple veneer interior with a matching finished exterior
• 3/4 inch thick, 1 1/2 inch wide kiln dried hardwood frame, interlock installed
• 3/4 inch plywood shelves, fully adjustable
• Heavy duty concealed steel hinges, six way adjustable with soft close
• 3/4 inch solid wood dovetail drawers on stainless steel full extension undermount glides

Mocha turns the Harmony profile into the loudest thing in the room, which is either what you want or exactly what you do not. Across a full run it reads as traditional furniture, and on an island alone with a lighter perimeter around it the profile does the same job with a quarter of the commitment. HM Cabinetry runs CNC Cabinetry Harmony Pearl Mocha HB13M both ways in Middlesex and Monmouth county kitchens and will draw the room each way before you settle it.
The practical difference between the two Harmony finishes is maintenance rather than build. A deeper tone shows dust along the top rail and inside the angled molding sooner than the pearl does, and it marks more visibly around the handle. Against that, it hides the scuffs that turn up near the trash pull and the toe kick. The build is identical either way, a full half inch plywood back on the interlock system, half inch plywood sides with a light maple veneer interior, three quarter inch adjustable plywood shelves, and solid wood dovetail drawers on stainless steel full extension undermount glides.
Running both Harmony finishes in one kitchen is common and it needs planning, because the perimeter and the island have to be ordered together to keep the two runs consistent. HM Cabinetry handles that as a single order, sets the six way hinges after the first heating season, and keeps a spare Harmony Pearl Mocha HB13M door back for the island.
Send a photo or a rough sketch of your kitchen and we will come back with real numbers for your own layout.