CNC Cabinetry Cascade White CT10
A raised panel in thermofoil is an unusual pairing, because the profile belongs to traditional cabinetry and the material is the easiest surface there is to keep clean. The CNC Cabinetry Cascade White CT10 puts a square raised panel under a white satin thermofoil skin on a frameless box. HM Cabinetry keeps the Cascade White CT10 door at the East Brunswick showroom, where the wrapped corners are the detail to look at.
What is built into the CNC Cabinetry Cascade White CT10
The appeal here is shape without joints. A five piece painted door has four corners that can open a hairline over time, while the CNC Cabinetry Cascade White CT10 is wrapped as one continuous white satin surface with the square raised panel formed underneath it. The cabinet is frameless with plywood sides, so the opening runs the full width of the box, and the drawers are metal with soft close.
• Full overlay square raised panel door
• White satin thermofoil finish wrapped over the profile
• No frames, center stiles or rails across the face
• Frameless box construction with full width openings
• Plywood box sides
• Metal drawers with a soft close feature
More about CNC Cabinetry Cascade White CT10
Cascade answers a request we hear often, which is traditional shape with modern upkeep. A square raised panel suits a house with trim and paneled interior doors, and the thermofoil surface wipes down in one pass with no open grain to hold cooking film and no joint lines to work it into. HM Cabinetry puts CNC Cabinetry Cascade White CT10 into busy Middlesex and Monmouth county kitchens, and into baths and laundry rooms where humidity rules out a painted wood door.
Frameless is the other half of this cabinet. With no face frame across the front the opening is the full width of the box, so a drawer holds more and a sheet pan goes in without being turned, and the hinges mount straight onto the side panel. The trade is that a frameless run asks more of the installer, because the openings line up against each other rather than hiding behind a frame. HM Cabinetry measures the room, draws it in 3D and sets the run dead level before the doors go on, which is the step that decides whether the reveals look right.
Thermofoil has one condition and it is heat. HM Cabinetry fits a heat shield where a Cascade White CT10 door sits tight to a slide in range or a dishwasher, sets the hinges after the first heating season, and orders replacement doors from the same batch so the satin level matches across the kitchen.
Related pages
Price your CNC Cabinetry Cascade White CT10
Send a photo or a rough sketch of your kitchen and we will come back with real numbers for your own layout.
- ✓ No obligation, no pressure
- ✓ Photos and drawings welcome
- ✓ Kitchen, bathroom and custom cabinetry